Portable Seats
Your first choice for special portable seating applications requiring optimal comfort. This popular logo chair is used for speacial team benches, locker rooms, and fundraising opportunities.
Roll-formed double tube and channel 19 gauge steel (all perforations in channel – no perforations in rolled tube); front "K" brace support; approximately 11" clearance between first cross-brace and floor; seat height from floor approximately 19"; rear legs have (2) steel embossed cross-braces for extra support/strength; on each chair leg (4) is a molded foot glide over an extra protective smooth "U" shaped metal pronged design hairpin for a secure friction fit. These are removable only with the use of tools.
Minimum 25 year limited metal frame warranty.
11 gauge steel frame; vertical leg approximately .875"W and horizontal leg approximately .625"W forms a rectangular frame measuring approximately 16.5"W x 15.5"L; heavy duty supported vinyl sewn seat; polyurethane foam seat cushion 2.5" to 3" thick; cushion conforms to ASTM D3574, California 117 and BIFMA fire retardant requirements; over .5" thick laminate/wood black chalkboard base with enough vent holes to allow for air discharge; seat frame and seat assembly will be attached directly by using vandal proof plated recessed hex head screws.
1" thick pure polyurethane foam; heavy duty supported vinyl; .125" shaped plywood backboard with threaded metal insert/fasteners; upholstered backrest is approximately 16.5"W x 8"H; attached with vandal-proof plated recessed hex head screws.
Heavy duty die formed 11 gauge steel brackets; designed for fast alignment; set-up/take down, binding prevention, and minimum chair movement. Chairs do not release when tipped back. Chairs are approximately 18.25" center to center.
Powder coat finish of not less than a thickness of 2.5mm.
Frame/Upholstery - As per customer selections.
As required on chair backrest, top of seat cushion, and/or front edge.